The effect of temperature on the synthesis of magnetite nanoparticles by the coprecipitation method.

Magnetic nanoparticles, such as magnetite (Fe3O4), exhibit superparamagnetic properties below 15 nm at room temperature. They are being explored for medical applications, and the coprecipitation technique is preferred for cost-effective production. This study investigates the impact of synthesis temperature on the nanoparticles' physicochemical characteristics. Two types of magnetic analysis were conducted. Samples T 40, T 50, and T 60 displayed superparamagnetic behavior, as evidenced by the magnetization curves. The experiments verified the development of magnetic nanoparticles with an average diameter of approximately dozens of nanometers, as determined by various measurement methods such as XDR, Raman, and TEM. Raman spectroscopy showed the characteristic bands of the magnetite phase at 319, 364, 499, and 680 cm-1. This was confirmed in the second analysis with the ZFC-FC curves, which showed that the samples' blocking temperatures were below ambient temperature. ZFC-FC curves revealed a similar magnetization of about 30 emu/g when applying a magnetic field of 5 kOe.

MarLe: Markerless estimation of head pose for navigated transcranial magnetic stimulation.

Navigated transcranial magnetic stimulation (nTMS) is a valuable tool for non-invasive brain stimulation. Currently, nTMS requires fixing of markers on the patient's head. Head marker displacements lead to changes in coil placement and brain stimulation inaccuracy. A markerless neuronavigation method is needed to increase the reliability of nTMS and simplify the nTMS protocol. In this study, we introduce and release MarLe, a Python markerless head tracker neuronavigation software for TMS. This novel software uses computer-vision techniques combined with low-cost cameras to estimate the head pose for neuronavigation. A coregistration algorithm, based on a closed-form solution, was designed to track the patient's head and the TMS coil referenced to the individual's brain image. We show that MarLe can estimate head pose based on real-time video processing. An intuitive pipeline was developed to connect the MarLe and nTMS neuronavigation software. MarLe achieved acceptable accuracy and stability in a mockup nTMS experiment. MarLe allows real-time tracking of the patient's head without any markers. The combination of face detection and a coregistration algorithm can overcome nTMS head marker displacement concerns. MarLe can improve reliability, simplify, and reduce the protocol time of brain intervention techniques such as nTMS.

Ferrite Shield to Enhance the Performance of Optically Pumped Magnetometers for Fetal Magnetocardiography.

Fetal magnetocardiography (fMCG) has proven to be an important tool for the prenatal monitoring of electrical cardiac activity; however, the high cost of superconducting quantum instrumentation (SQUID) poses a limitation for the dissemination of fMCG as a routine clinical technique. Recently, optically pumped magnetometers (OPMs) operating within person-sized, cylindrical shields have made fMCG more practical, but environmental magnetic interference entering through the shield opening substantially degrades the quality of fMCG signals. The goal of this study was to further attenuate these interferences by placing the OPM array within a small ferrite shield. FMCG recordings were made with and without the ferrite shield in ten subjects inside a person-sized, three-layer mu-metal cylindrical shield. Although the fetal signal was slightly attenuated, the environmental interference was reduced substantially, and maternal interference was also diminished. This increased the signal-to-noise ratio significantly and improved the resolution of the smaller waveform components. The performance improvement was highest in the axial direction and compensated for a major weakness of open-ended, person-sized shields. The ferrite shield is especially beneficial for the deployment of triaxial OPM sensors, which require effective shielding in all directions.

Hybrid Nanoparticles of Citrate-Coated Manganese Ferrite and Gold Nanorods in Magneto-Optical Imaging and Thermal Therapy.

The development of nanomaterials has drawn considerable attention in nanomedicine to advance cancer diagnosis and treatment over the last decades. Gold nanorods (GNRs) and magnetic nanoparticles (MNPs) have been known as commonly used nanostructures in biomedical applications due to their attractive optical properties and superparamagnetic (SP) behaviors, respectively. In this study, we proposed a simple combination of plasmonic and SP properties into hybrid NPs of citrate-coated manganese ferrite (Ci-MnFe2O4) and cetyltrimethylammonium bromide-coated GNRs (CTAB-GNRs). In this regard, two different samples were prepared: the first was composed of Ci-MnFe2O4 (0.4 wt%), and the second contained hybrid NPs of Ci-MnFe2O4 (0.4 wt%) and CTAB-GNRs (0.04 wt%). Characterization measurements such as UV-Visible spectroscopy and transmission electron microscopy (TEM) revealed electrostatic interactions caused by the opposing surface charges of hybrid NPs, which resulted in the formation of small nanoclusters. The performance of the two samples was investigated using magneto-motive ultrasound imaging (MMUS). The sample containing Ci-MnFe2O4_CTAB-GNRs demonstrated a displacement nearly two-fold greater than just using Ci-MnFe2O4; therefore, enhancing MMUS image contrast. Furthermore, the preliminary potential of these hybrid NPs was also examined in magnetic hyperthermia (MH) and photoacoustic imaging (PAI) modalities. Lastly, these hybrid NPs demonstrated high stability and an absence of aggregation in water and phosphate buffer solution (PBS) medium. Thus, Ci-MnFe2O4_CTAB-GNRs hybrid NPs can be considered as a potential contrast agent in MMUS and PAI and a heat generator in MH.

Electron Spin Resonance Dosimetry Studies of Irradiated Sulfite Salts.

The study of new materials for radiation dosimetry is important to improve the present state of the art and to help in cases of accidents for retrospective dosimetry. Sulfites are compounds that contain a sulfur ion, widely used in the food industry. Due to the significant application of these compounds, sulfites are interesting candidates for accidental dosimetry, as fortuitous radiation detectors. The presence of the SO3- anion enables its detection by electron spin resonance (ESR) spectroscopy. The Dose-Response behavior, signal stability and other spectral features were investigated for sodium sulfite, sodium bisulfite, sodium metabisulfite and potassium metabisulfite, all in crystalline forms. The ESR spectrum of salts presented stability and proportional response with dose, presenting potential for dosimetry applications.

Quantitative imaging of magnetic nanoparticles in an unshielded environment using a large AC susceptibility array.

BACKGROUND: Non-invasive magnetic imaging techniques are necessary to assist magnetic nanoparticles in biomedical applications, mainly detecting their distribution inside the body. In Alternating Current Biosusceptometry (ACB), the magnetic nanoparticle's magnetization response under an oscillating magnetic field, which is applied through an excitation coil, is detected with a balanced detection coil system. RESULTS: We built a Multi-Channel ACB system (MC-ACB) containing nineteen pick-up coils and obtained 2D quantitative images of magnetic nanoparticle distributions by solving an inverse problem. We reconstructed the magnetic nanoparticles spatial distributions in a field of view of 14 × 14 cm2 with a spatial resolution of 2.0 cm and sensitivity in the milligram scale. A correlation coefficient between quantitative reconstructed and nominal magnetic nanoparticle distributions above 0.6 was found for all measurements. CONCLUSION: Besides other interesting features such as sufficient large field of view dimension for mice and rat studies, portability, and the ability to assess the quantitative magnetic nanoparticles distributions in real-time, the MC-ACB system is a promising tool for quantitative imaging of magnetic nanoparticles distributions in real-time, offering an affordable setup for easy access in clinical or laboratory environments.

Biodistribution Profile of Magnetic Nanoparticles in Cirrhosis-Associated Hepatocarcinogenesis in Rats by AC Biosusceptometry.

Since magnetic nanoparticles (MNPs) have been used as multifunctional probes to diagnose and treat liver diseases in recent years, this study aimed to assess how the condition of cirrhosis-associated hepatocarcinogenesis alters the biodistribution of hepatic MNPs. Using a real-time image acquisition approach, the distribution profile of MNPs after intravenous administration was monitored using an AC biosusceptometry (ACB) assay. We assessed the biodistribution profile based on the ACB images obtained through selected regions of interest (ROIs) in the heart and liver position according to the anatomical references previously selected. The signals obtained allowed for the quantification of pharmacokinetic parameters, indicating that the uptake of hepatic MNPs is compromised during liver cirrhosis, since scar tissue reduces blood flow through the liver and slows its processing function. Since liver monocytes/macrophages remained constant during the cirrhotic stage, the increased intrahepatic vascular resistance associated with impaired hepatic sinusoidal circulation was considered the potential reason for the change in the distribution of MNPs.

Three-Dimensional Dosimetry by Optical-CT and Radiochromic Gel Dosimeter of a Multiple Isocenter Craniospinal Radiation Therapy Procedure.

Craniospinal irradiation (CSI) is a complex radiation technique employed to treat patients with primitive neuroectodermal tumors such as medulloblastoma or germinative brain tumors with the risk of leptomeningeal spread. In adults, this technique poses a technically challenging planning process because of the complex shape and length of the target volume. Thus, it requires multiple fields and different isocenters to guarantee the primary-tumor dose delivery. Recently, some authors have proposed the use IMRT technique for this planning with the possibility of overlapping adjacent fields. The high-dose delivery complexity demands three-dimensional dosimetry (3DD) to verify this irradiation procedure and motivated this study. We used an optical CT and a radiochromic Fricke-xylenol-orange gel with the addition of formaldehyde (FXO-f) to evaluate the doses delivered at the field junction region of this treatment. We found 96.91% as the mean passing rate using the gamma analysis with 3%/2 mm criteria at the junction region. However, the concentration of fail points in a determined region called attention to this evaluation, indicating the advantages of employing a 3DD technique in complex dose-distribution verifications.

Influence of silver nanoparticles on the tissue reaction of polyacrylic acid-based gel.

PURPOSE: To study the influence of silver nanoparticles (AgNP) on tissue reaction when incorporated into a polymeric matrix of polyacrylic acid-based (Carbopol®) gel as a proposal for a new low-cost type of biomaterial that is simple to manufacture for use as an antimicrobial and antioxidative dressing. METHODS: In-vivo tests of implantation in the subcutaneous tissue of the back of rats were performed using polyethylene tubes in three situations: empty, only the gel, and gel incorporated with AgNP. Then, the tissue reaction was studied by counting inflammatory cells. Additionally, in-vitro tests of the antioxidative and antimicrobial activity of AgNP were performed. The radical 2,2 diphenyl-1 picrylhydrazyl (DPPH) was used to test the antioxidative activity of AgNP using electron spin resonance. The antimicrobial activity of AgNP was determined by minimum inhibitory concentration against the microorganisms: Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli. RESULTS: The results indicated that AgNP presents antioxidative activity and was able to inhibit the growth of the microorganisms tested. The addition of AgNP in Carbopol® did not alter the tissue inflammatory response (p>0.05, Kruskal-Wallis's test). CONCLUSIONS: The new biomaterial is promising for future use as a dressing for its beneficial properties for regenerative processes.

Long-Term Clearance and Biodistribution of Magnetic Nanoparticles Assessed by AC Biosusceptometry.

Once administered in an organism, the physiological parameters of magnetic nanoparticles (MNPs) must be addressed, as well as their possible interactions and retention and elimination profiles. Alternating current biosusceptometry (ACB) is a biomagnetic detection system used to detect and quantify MNPs. The aims of this study were to evaluate the biodistribution and clearance of MNPs profiles through long-time in vivo analysis and determine the elimination time carried out by the association between the ACB system and MnFe2O4 nanoparticles. The liver, lung, spleen, kidneys, and heart and a blood sample were collected for biodistribution analysis and, for elimination analysis, and over 60 days. During the period analyzed, the animal's feces were also collectedd. It was possible to notice a higher uptake by the liver and the spleen due to their characteristics of retention and uptake. In 60 days, we observed an absence of MNPs in the spleen and a significant decay in the liver. We also determined the MNPs' half-life through the liver and the spleen elimination. The data indicated a concentration decay profile over the 60 days, which suggests that, in addition to elimination via feces, there is an endogenous mechanism of metabolization or possible agglomeration of MNPs, resulting in loss of ACB signal intensity.

Forearm and Hand Muscles Exhibit High Coactivation and Overlapping of Cortical Motor Representations.

Most of the motor mapping procedures using navigated transcranial magnetic stimulation (nTMS) follow the conventional somatotopic organization of the primary motor cortex (M1) by assessing the representation of a particular target muscle, disregarding the possible coactivation of synergistic muscles. In turn, multiple reports describe a functional organization of the M1 with an overlapping among motor representations acting together to execute movements. In this context, the overlap degree among cortical representations of synergistic hand and forearm muscles remains an open question. This study aimed to evaluate the muscle coactivation and representation overlapping common to the grasping movement and its dependence on the stimulation parameters. The nTMS motor maps were obtained from one carpal muscle and two intrinsic hand muscles during rest. We quantified the overlapping motor maps in size (area and volume overlap degree) and topography (similarity and centroid Euclidean distance) parameters. We demonstrated that these muscle representations are highly overlapped and similar in shape. The overlap degrees involving the forearm muscle were significantly higher than only among the intrinsic hand muscles. Moreover, the stimulation intensity had a stronger effect on the size compared to the topography parameters. Our study contributes to a more detailed cortical motor representation towards a synergistic, functional arrangement of M1. Understanding the muscle group coactivation may provide more accurate motor maps when delineating the eloquent brain tissue during pre-surgical planning.

ESR dosimetry with lithium, potassium, and sodium compounds.

This work consists of a first investigation of materials that could be used as ESR dosimeters with doses up to 5 Gy aiming possible applications that would include retrospective dosimetry or dosimetry in specific applications. The characteristics considered were radiological properties close to that of soft tissues, evaluated through their effective atomic number and mass attenuation coefficient, ESR signal dependence on the irradiation dose, sensitivity to dose in the range of ∼5 Gy when exposed to a 50 kV x-ray source and signal stability over a 30-day period. A total of 16 compounds of lithium, potassium and sodium were analyzed, including the already known dosimeter material, lithium formate. Among them, lithium carbonate, lithium phosphate, sodium formate, sodium acetate, sodium citrate, sodium dithionite, sodium carbonate, showed eligible characteristics. After analyzing the ESR dose-response curves, the molecules that showed greater sensitivity to radiation in descending order are: sodium formate, sodium acetate, sodium citrate and sodium dithionite, however, lower than lithium formate. Sodium formate and sodium citrate presented ESR signals with high stability, similar to lithium formate, with fading of ∼3% in 30 days, different from sodium acetate, which showed a 19% reduction. Sodium citrate also presents radiological properties close to soft tissue. Therefore, considering all properties, in the set of the new materials studied in this work, sodium citrate is a promising material for ESR dosimetry.

TMS with fast and accurate electronic control: Measuring the orientation sensitivity of corticomotor pathways.

BACKGROUND: Transcranial magnetic stimulation (TMS) coils allow only a slow, mechanical adjustment of the stimulating electric field (E-field) orientation in the cerebral tissue. Fast E-field control is needed to synchronize the stimulation with the ongoing brain activity. Also, empirical models that fully describe the relationship between evoked responses and the stimulus orientation and intensity are still missing. OBJECTIVE: We aimed to (1) develop a TMS transducer for manipulating the E-field orientation electronically with high accuracy at the neuronally meaningful millisecond-level time scale and (2) devise and validate a physiologically based model describing the orientation selectivity of neuronal excitability. METHODS: We designed and manufactured a two-coil TMS transducer. The coil windings were computed with a minimum-energy optimization procedure, and the transducer was controlled with our custom-made electronics. The electronic E-field control was verified with a TMS characterizer. The motor evoked potential amplitude and latency of a hand muscle were mapped in 3° steps of the stimulus orientation in 16 healthy subjects for three stimulation intensities. We fitted a logistic model to the motor response amplitude. RESULTS: The two-coil TMS transducer allows one to manipulate the pulse orientation accurately without manual coil movement. The motor response amplitude followed a logistic function of the stimulus orientation; this dependency was strongly affected by the stimulus intensity. CONCLUSION: The developed electronic control of the E-field orientation allows exploring new stimulation paradigms and probing neuronal mechanisms. The presented model helps to disentangle the neuronal mechanisms of brain function and guide future non-invasive stimulation protocols.

2D Quantitative Imaging of Magnetic Nanoparticles by an AC Biosusceptometry Based Scanning Approach and Inverse Problem.

The use of magnetic nanoparticles (MNPs) in biomedical applications requires the quantitative knowledge of their quantitative distribution within the body. AC Biosusceptometry (ACB) is a biomagnetic technique recently employed to detect MNPs in vivo by measuring the MNPs response when exposed to an alternate magnetic field. The ACB technique presents some interesting characteristics: non-invasiveness, low operational cost, high portability, and no need for magnetic shielding. ACB conventional methods until now provided only qualitative information about the MNPs' mapping in small animals. We present a theoretical model and experimentally demonstrate the feasibility of ACB reconstructing 2D quantitative images of MNPs' distributions. We employed an ACB single-channel scanning approach, measuring at 361 sensor positions, to reconstruct MNPs' spatial distributions. For this, we established a discrete forward problem and solved the ACB system's inverse problem. Thus, we were able to determine the positions and quantities of MNPs in a field of view of 5×5×1 cm3 with good precision and accuracy. The results show the ACB system's capabilities to reconstruct the quantitative spatial distribution of MNPs with a spatial resolution better than 1 cm, and a sensitivity of 1.17 mg of MNPs fixed in gypsum. These results show the system's potential for biomedical application of MNPs in several studies, for example, electrochemical-functionalized MNPs for cancer cell targeting, quantitative sensing, and possibly in vivo imaging.

Dose enhancement factor caused by gold nanoparticles: influence of the dosimetric sensitivity and radiation dose assessed by electron spin resonance dosimetry.

Gold nanoparticles have been extensively used to increase the sensitivity of radiation dosimeters. In this work, nanocomposites of alanine (Ala), 2-methylalanine (2MA), asparagine (Asn) and monosodium glutamate (MSG) containing gold nanoparticles were prepared. The influence of the mass percentage of gold (0.1% up to 3%), absorbed dose (2 Gy-10 kGy) and the intrinsic sensitivity of these materials on the dose enhancement factor (DEF) were investigated. The prepared nanocomposites were characterized by UV-vis absorption spectroscopy and dynamic light scattering technique. Electron spin resonance spectroscopy was employed to assess the dosimetric response. The results revealed that the gold nanoparticles aggregated in the nanocomposites of MSG and Asn but not in the Ala and 2MA samples. Higher DEFs were observed for materials with lower intrinsic sensitivities (Asn and MSG) and for lower doses of radiation, suggesting that the dosimetric response of the nanocomposite dosimeters is governed by the probability of radical recombination. The higher the radiation dose, gold mass percentage and/or intrinsic sensitivity of the dosimetric material, the higher the production of radiation-induced free-radicals, enhancing the probability of radical recombination and resulting in lower DEFs. These results bring new insights about the use of gold nanoparticles to the construction of more sensitive radiation dosimeters.

Magnetic Characterization by Scanning Microscopy of Functionalized Iron Oxide Nanoparticles.

This study aimed to systematically understand the magnetic properties of magnetite (Fe3O4) nanoparticles functionalized with different Pluronic F-127 surfactant concentrations (Fe3O4@Pluronic F-127) obtained by using an improved magnetic characterization method based on three-dimensional magnetic maps generated by scanning magnetic microscopy. Additionally, these Fe3O4 and Fe3O4@Pluronic F-127 nanoparticles, as promising systems for biomedical applications, were prepared by a wet chemical reaction. The magnetization curve was obtained through these three-dimensional maps, confirming that both Fe3O4 and Fe3O4@Pluronic F-127 nanoparticles have a superparamagnetic behavior. The as-prepared samples, stored at approximately 20 °C, showed no change in the magnetization curve even months after their generation, resulting in no nanoparticles free from oxidation, as Raman measurements have confirmed. Furthermore, by applying this magnetic technique, it was possible to estimate that the nanoparticles' magnetic core diameter was about 5 nm. Our results were confirmed by comparison with other techniques, namely as transmission electron microscopy imaging and diffraction together with Raman spectroscopy. Finally, these results, in addition to validating scanning magnetic microscopy, also highlight its potential for a detailed magnetic characterization of nanoparticles.

Comprehensive quality assurance for intracranial radiosurgery treatments using a postal system / Garantía de calidad para tratamientos de radiocirugía intracranial usando un sistema postal

Radiosurgery is a high-precision technique for delivering, in most cases, a single highly conformal dose to a stereotactically localized target. It can be indicated for small intracranial injury treatment, using either multiple sources of 60Co (γ rays) or high energy photon beams produced by linear accelerators. In order to minimize the impact of inaccurate localization of the target or dose delivery, a rigorous Quality Assurance (QA) program must be enforced, which should include an independent auditing system. This work proposes a simple and reliable postal QA phantom to be used as an independent evaluation. In it two important parameters were verified such as, the dosimetric precision of the planning system, by comparing the absorbed doses measured in the target volume using different dosimeters (ionization chamber, films, thermoluminescent dosimeters and L-alanine dosimeters) all calibrated against a small volume ion chamber. The exact positioning of the target volume was localized using air spaces and small steel spheres to find the appropriate target coordinates. The head phantom and the instruction sheets were extensively tested and sent by mail to selected institutions. The overall results were very encouraging and suggest that the proposed phantom may be used as a postal system as part of an independent QA tool in radiosurgery.

La radiocirugía es una técnica de alta precisión para administrar, en la mayoría de los casos, una sola dosis altamente conformada en un objetivo localizado estereotípicamente. Puede estar indicado para el tratamiento de pequeñas lesiones intracraneales, utilizando múltiples fuentes de 60Co (rayos γ) o haces de fotones de alta energía producidos por aceleradores lineales. Con el fin de minimizar el impacto de la ubicación inexacta de la administración de la meta o de la dosis, se debe aplicar un riguroso programa de control de calidad (QA), que debe incluir un sistema de auditoría independiente. Este documento propone un fantoma postal de control de calidad simple y fiable que se utilizará como evaluación independiente. Se verificó dos parámetros importantes, como la precisión dosimétrica del sistema de planificación, comparando las dosis absorbidas medidas en el volumen objetivo mediante diferentes dosis (cámara de ionización, películas, dosímetros Termoluminiscentes y dosímetros de L-alanina) todos calibrados con una pequeña cámara de iones de volumen. El posicionamiento exacto del volumen objetivo se localizó utilizando espacios aéreos y pequeñas esferas de acero para encontrar las coordenadas de destino adecuadas. El fantoma principal y las hojas de instrucciones fueron ampliamente probados y enviados por correo a instituciones seleccionadas. Los resultados generales fueron muy alentadores y sugieren que el fantoma propuesto puede utilizarse como sistema postal como parte de una herramienta independiente de control de calidad en radiocirugía.

Gel and thermoluminescence dosimetry for dose verifications of a real anatomy simulated prostate conformal radiation treatment in the presence of metallic femoral prosthesis.

This study aims to verify the dose delivery of prostate radiotherapy treatments in an adult pelvic phantom with two metallic hip and femur prosthesis using a four-field box technique. The prostate planned target volume (PTV) tridimensional (3D) dose distribution was evaluated using gel dosimetry, and thermoluminescent dosimeters (TLD) were used for point-dose measurements outside it. Both results were compared to the treatment planning system (TPS) dose calculation without using heterogeneity corrections to evaluate the influence of the metal in the dose distribution. MAGIC-f gel dosimeter (Methacrylic and Ascorbic acid in Gelatin Initiated by Copper with Formaldehyde) associated with magnetic resonance imaging was used. TLD were positioned at several points at the bone metal interface and the sacrum region. The comparison of the gel measured and the TPS calculated dose distributions were done using gamma analysis (3%/3 mm), and a pass rate of 93% was achieved. The TLD dose values at the bone-metal interface showed variations from the planned dose. However, at the sacrum region, where the beams did not intercept the prosthesis, there was a good agreement between TPS planning and TLD measurements. Our results show how the combination of 3D dosimetry and measurements at specific points in the phantom allowed a comprehensive view of the dose distribution and identified that care must also be paid to regions outside the PTV.

Conversion factor for size specific dose estimation of head CT scans based on age, for individuals from 0 up to 18 years old.

Assessing the radiation doses received by patients in computed tomography is still challenging. To overcome this, the American Association of Physicists in Medicine has introduced the concept of the size specific dose estimate (SSDE). However, the calculation of SSDE for head CT scans requires the knowledge of attenuation characteristics of the volume scanned, making its implementation in the daily clinical workflow cumbersome. In this study, we defined conversion coefficients from CTDIvol,16cmto SSDE for head CT scans based solely on the age of the patient. Using the head circumference-for-age from the child growth standards of the World Health Organization (WHO), the effective diameter-for-age was calculated for male and female individuals from 0 to 60 months-old. The effective diameter was converted into a water equivalent diameter-for-age, using a correlation established from the measurements of both quantities in 295 exams of male and female patients, from 0 to 18 years-old. WHO-estimated water equivalent diameter-for-age was validated against the measured water equivalent diameter-for-age. The head circumference-for-age from WHO was extrapolated for male and females individuals up to 18 years-old and their respective water equivalent diameter were estimated. Finally, the SSDE was calculated for all the CT head scans performed in a 9-years period in patients aged from 0 to 18 years old. Typical values of CTDIvol,16cmand DLP were also defined. SSDE varied from 0.80 up to 1.16 of the CTDIvol,16cm, depending on sex and age of the patient. WHO-estimated water equivalent diameter-for-age differed less than 20% from the measured water equivalent diameter-for-age. Typical values of SSDE varied from 28.5 up to 38.9 mGy, while typical values ranged from 30.9 up to 47.6 mGy for the CTDIvol,16cmand from 417.6 up to 861.1 mGy*cm for the DLP. SSDE can be directly calculated for head CT scans once the age of the patient is known.